T. rex dinosaur silhouette SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The T. rex as a solid shape, facing left and rearing up to roar, with its teeth showing in outline and no inside cuts. For stencils, small decals and party bunting.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.13 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 453 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 187 curve and line segments |
Measured from the file. PNG: 2,000 × 1,608 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.41 mm | 115 mm | 120 | Too fine for most machines |
| 2 × 1.59 in (51 × 40 mm) | 0.81 mm | 230 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.39 in (76 × 61 mm) | 1.2 mm | 345 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.18 in (102 × 81 mm) | 1.6 mm | 460 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.78 in (152 × 121 mm) | 2.4 mm | 690 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.37 in (203 × 162 mm) | 3.3 mm | 920 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.55 in (305 × 243 mm) | 4.9 mm | 1,381 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.