Free dinosaur SVG

T. rex dinosaur head SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

T. rex dinosaur head, as a solid black shape
T. rex dinosaur head. The preview is the SVG file itself.

The head and neck of a T. rex with its jaws wide open: teeth top and bottom, an eye under a heavy brow, a nostril and three stripes on the neck. For shirts that roar.

What is in the file

Size100 × 74 mm (3.94 × 2.89 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length502 mm at this size
Narrowest part1.9 mm at this size
Nodes148 curve and line segments

Measured from the file. PNG: 2,000 × 1,490 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.74 in (25 × 19 mm)0.48 mm128 mm130Too fine for most machines
2 × 1.47 in (51 × 37 mm)0.97 mm255 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.2 in (76 × 56 mm)1.4 mm383 mm15Vinyl, card and thin sheet
4 × 2.94 in (102 × 75 mm)1.9 mm510 mm6Vinyl, card and thin sheet
6 × 4.41 in (152 × 112 mm)2.9 mm765 mm2Vinyl, card and thin sheet
8 × 5.88 in (203 × 149 mm)3.9 mm1,020 mm2Any material, including 3 mm wood and acrylic
12 × 8.82 in (305 × 224 mm)5.8 mm1,530 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dinosaur SVG files

← T. rex dinosaur silhouette All 16 dinosaurs Raptor dinosaur →