Free dinosaur SVG

Dinosaur outline SVG

Dinosaur outline, drawn as a line — Dinosaur outline. The preview is the SVG file itself.

The long-neck dinosaur as one even line round its head, neck, body, legs and tail, in a single closed piece with no eye, so you can draw your own. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 3 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	804 mm at this size
Narrowest part	1.6 mm at this size
Nodes	317 curve and line segments

Measured from the file. PNG: 2,000 × 1,544 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.41 mm	204 mm	120	Too fine for most machines
2 × 1.53 in (51 × 39 mm)	0.81 mm	408 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.29 in (76 × 58 mm)	1.2 mm	613 mm	12	Vinyl, card and thin sheet
4 × 3.05 in (102 × 78 mm)	1.6 mm	817 mm	6	Vinyl, card and thin sheet
6 × 4.58 in (152 × 116 mm)	2.4 mm	1,225 mm	2	Vinyl, card and thin sheet
8 × 6.1 in (203 × 155 mm)	3.3 mm	1,634 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.16 in (305 × 233 mm)	4.9 mm	2,451 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dinosaur SVG files

← Dinosaur silhouette All 16 dinosaurs Triceratops dinosaur →