Trail of dinosaur footprints SVG
Five tracks walking up the page, left and right by turns and each a little smaller than the last. Loose pieces: lay them across a floor, a wall or a birthday table.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 54 × 100 mm (2.11 × 3.94 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 5 outlines |
| Cut length | 402 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 258 curve and line segments |
Measured from the file. PNG: 1,110 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.54 × 1 in (14 × 25 mm) | 0.69 mm | 102 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 1.07 × 2 in (27 × 51 mm) | 1.4 mm | 204 mm | 45 | Vinyl, card and thin sheet |
| 1.61 × 3 in (41 × 76 mm) | 2.1 mm | 306 mm | 18 | Vinyl, card and thin sheet |
| 2.15 × 4 in (55 × 102 mm) | 2.7 mm | 408 mm | 10 | Vinyl, card and thin sheet |
| 3.22 × 6 in (82 × 152 mm) | 4.1 mm | 613 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.3 × 8 in (109 × 203 mm) | 5.5 mm | 817 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.44 × 12 in (164 × 305 mm) | 8.2 mm | 1,225 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Dinosaur bone 
Set of four dinosaurs 
T. rex dinosaur 
T. rex dinosaur silhouette 
T. rex dinosaur head 
Raptor dinosaur 
Long-neck dinosaur 
Dinosaur silhouette 