Free dinosaur SVG

Long-neck dinosaur SVG

Long-neck dinosaur, as a solid black shape — Long-neck dinosaur. The preview is the SVG file itself.

A long-necked plant-eater of the brontosaurus kind: a small smiling head on a tall neck, a deep body on four pillar legs, a long tail and spots along its back.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 3 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	512 mm at this size
Narrowest part	2.2 mm at this size
Nodes	232 curve and line segments

Measured from the file. PNG: 2,000 × 1,544 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.56 mm	130 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.53 in (51 × 39 mm)	1.1 mm	260 mm	35	Vinyl, card and thin sheet
3 × 2.29 in (76 × 58 mm)	1.7 mm	390 mm	12	Vinyl, card and thin sheet
4 × 3.05 in (102 × 78 mm)	2.2 mm	520 mm	6	Vinyl, card and thin sheet
6 × 4.58 in (152 × 116 mm)	3.4 mm	780 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.1 in (203 × 155 mm)	4.5 mm	1,040 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.16 in (305 × 233 mm)	6.7 mm	1,561 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dinosaur SVG files

← Raptor dinosaur All 16 dinosaurs Dinosaur silhouette →