Free dinosaur SVG

Stegosaurus dinosaur SVG

Stegosaurus dinosaur, as a solid black shape — Stegosaurus dinosaur. The preview is the SVG file itself.

A stegosaurus with eight plates along its arched back, the tallest over the hips, two spikes on its tail and a small head held low. A dot is cut in the bigger plates.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.56 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	534 mm at this size
Narrowest part	1.9 mm at this size
Nodes	251 curve and line segments

Measured from the file. PNG: 2,000 × 1,325 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 16 mm)	0.48 mm	136 mm	140	Too fine for most machines
2 × 1.3 in (51 × 33 mm)	0.97 mm	271 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.95 in (76 × 49 mm)	1.4 mm	407 mm	15	Vinyl, card and thin sheet
4 × 2.6 in (102 × 66 mm)	1.9 mm	543 mm	8	Vinyl, card and thin sheet
6 × 3.89 in (152 × 99 mm)	2.9 mm	814 mm	2	Vinyl, card and thin sheet
8 × 5.19 in (203 × 132 mm)	3.9 mm	1,085 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.79 in (305 × 198 mm)	5.8 mm	1,628 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dinosaur SVG files

← Triceratops dinosaur All 16 dinosaurs Cute dinosaur →