Free dinosaur SVG

Triceratops dinosaur SVG

Triceratops dinosaur, as a solid black shape — Triceratops dinosaur. The preview is the SVG file itself.

A triceratops in side view: two long brow horns, a short nose horn, a beak, a frill with a knobbed edge, a barrel of a body on four sturdy legs and a short tail.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.59 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	663 mm at this size
Narrowest part	4 mm at this size
Nodes	285 curve and line segments

Measured from the file. PNG: 2,000 × 1,342 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	1 mm	168 mm	140	Vinyl, card and thin sheet
2 × 1.32 in (51 × 33 mm)	2 mm	337 mm	40	Vinyl, card and thin sheet
3 × 1.97 in (76 × 50 mm)	3 mm	505 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.63 in (102 × 67 mm)	4.1 mm	674 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.95 in (152 × 100 mm)	6.1 mm	1,010 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.26 in (203 × 134 mm)	8.1 mm	1,347 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.9 in (305 × 201 mm)	12 mm	2,021 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dinosaur SVG files

← Dinosaur outline All 16 dinosaurs Stegosaurus dinosaur →