Free diamond SVG

Diamond plate pattern SVG

Diamond plate pattern, as a solid black shape — Diamond plate pattern. The preview is the SVG file itself.

A square panel pierced with small pointed ovals set at right angles to each other, the raised pattern of steel tread plate. For toolbox labels, garage signs and truck designs.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	50: 1 outer edge and 49 cut-outs
Cut length	1,940 mm at this size
Narrowest part	2.8 mm at this size
Nodes	474 curve and line segments
Symmetry	2-fold rotation

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.71 mm	493 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.4 mm	986 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.1 mm	1,478 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.8 mm	1,971 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	4.3 mm	2,957 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	5.7 mm	3,942 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	8.5 mm	5,913 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More diamond SVG files

← Argyle panel All 21 diamonds Aztec stepped diamond →