Free diamond SVG

Sparkling diamond SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sparkling diamond, as a solid black shape
Sparkling diamond. The preview is the SVG file itself.

A faceted diamond with three four-pointed sparkles beside it. The sparkles are separate pieces by design, and the stone itself is one piece.

What is in the file

Size96 × 100 mm (3.78 × 3.94 in), scales to any size
Pieces4 separate pieces
Outlines to cut13: 4 outer edges and 9 cut-outs
Cut length752 mm at this size
Narrowest part1.6 mm at this size
Nodes53 curve and line segments
Also found asDiamond sparkle SVG

Measured from the file. PNG: 1,923 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.41 mm191 mm100Too fine for most machines
1.92 × 2 in (49 × 51 mm)0.81 mm382 mm25Fine detail: vinyl and paper only, weed with care
2.88 × 3 in (73 × 76 mm)1.2 mm573 mm9Vinyl, card and thin sheet
3.84 × 4 in (98 × 102 mm)1.6 mm764 mm6Vinyl, card and thin sheet
5.76 × 6 in (146 × 152 mm)2.4 mm1,146 mm2Vinyl, card and thin sheet
7.68 × 8 in (195 × 203 mm)3.3 mm1,528 mm1Any material, including 3 mm wood and acrylic
11.52 × 12 in (293 × 305 mm)4.9 mm2,292 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More diamond SVG files

← Two-tone faceted diamond All 21 diamonds Diamond ring →