Two-tone faceted diamond SVG
The line-drawn diamond with three facets filled in, two on the crown and one below, for a look of light and shadow in a single colour.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.31 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 785 mm at this size |
| Narrowest part | 3.3 mm at this size |
| Nodes | 21 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,692 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 0.84 mm | 199 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.68 in (51 × 43 mm) | 1.7 mm | 399 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.52 in (76 × 64 mm) | 2.5 mm | 598 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.36 in (102 × 85 mm) | 3.4 mm | 798 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.04 in (152 × 128 mm) | 5 mm | 1,196 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.72 in (203 × 171 mm) | 6.7 mm | 1,595 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.08 in (305 × 256 mm) | 10 mm | 2,393 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Sparkling diamond 
Diamond ring 
Three diamonds 
Round diamond from above 
Emerald-cut gemstone 
Kite-cut gem 
Crystal cluster 
Diamond shape 