Three diamonds SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three faceted diamonds, a large one below and two smaller ones tilted above it. Three separate pieces by design, for scattering or using one at a time.
What is in the file
| Size | 100 × 88 mm (3.94 × 3.48 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 30: 3 outer edges and 27 cut-outs |
| Cut length | 1,050 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 123 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,775 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.88 in (25 × 22 mm) | 0.33 mm | 267 mm | 110 | Too fine for most machines |
| 2 × 1.77 in (51 × 45 mm) | 0.66 mm | 533 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.65 in (76 × 67 mm) | 0.99 mm | 800 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.53 in (102 × 90 mm) | 1.3 mm | 1,067 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.3 in (152 × 135 mm) | 2 mm | 1,600 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.06 in (203 × 179 mm) | 2.6 mm | 2,134 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.6 in (305 × 269 mm) | 4 mm | 3,200 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.