Diamond ring SVG
A solitaire ring: a round band with a faceted diamond set on a small collar at the top. One welded piece, for engagement cards, bridal shower signs and gift tags.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 66 × 100 mm (2.59 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 673 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 58 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,344 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | 0.53 mm | 171 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 1.32 × 2 in (33 × 51 mm) | 1.1 mm | 342 mm | 40 | Vinyl, card and thin sheet |
| 1.98 × 3 in (50 × 76 mm) | 1.6 mm | 513 mm | 15 | Vinyl, card and thin sheet |
| 2.64 × 4 in (67 × 102 mm) | 2.1 mm | 684 mm | 8 | Vinyl, card and thin sheet |
| 3.95 × 6 in (100 × 152 mm) | 3.2 mm | 1,026 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.27 × 8 in (134 × 203 mm) | 4.3 mm | 1,368 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.91 × 12 in (201 × 305 mm) | 6.4 mm | 2,051 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Three diamonds 
Round diamond from above 
Emerald-cut gemstone 
Kite-cut gem 
Crystal cluster 
Diamond shape 
Diamond shape outline 
Playing card diamond 