Crystal cluster SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Five crystal points of different heights growing from a rock base, each with slits for its faces and a thin cut line where one stands in front of another.
What is in the file
| Size | 78 × 100 mm (3.06 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 14: 1 outer edge and 13 cut-outs |
| Cut length | 1,003 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 102 curve and line segments |
Measured from the file. PNG: 1,573 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.78 × 1 in (20 × 25 mm) | 0.25 mm | 255 mm | 120 | Too fine for most machines |
| 1.56 × 2 in (40 × 51 mm) | 0.51 mm | 510 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.33 × 3 in (59 × 76 mm) | 0.76 mm | 764 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 3.11 × 4 in (79 × 102 mm) | 1 mm | 1,019 mm | 6 | Vinyl, card and thin sheet |
| 4.67 × 6 in (119 × 152 mm) | 1.5 mm | 1,529 mm | 2 | Vinyl, card and thin sheet |
| 6.22 × 8 in (158 × 203 mm) | 2 mm | 2,038 mm | 1 | Vinyl, card and thin sheet |
| 9.34 × 12 in (237 × 305 mm) | 3 mm | 3,057 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.