Free diamond SVG

Diamond monogram frame SVG

Diamond monogram frame, drawn as a line — Diamond monogram frame. The preview is the SVG file itself.

A square stood on its point, drawn as a heavy line with a fine line inside it, a small diamond at each corner and four ties. The open middle takes a monogram.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	967 mm at this size
Narrowest part	3.3 mm at this size
Nodes	40 curve and line segments
Symmetry	4-fold rotation and mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.84 mm	246 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.7 mm	491 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.5 mm	737 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	3.4 mm	982 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	5 mm	1,474 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	6.7 mm	1,965 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	10 mm	2,947 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More diamond SVG files

← Nested diamonds All 21 diamonds Diamond border →