Diamond with facet cuts SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The classic cut diamond seen from the side: a flat table, a wide girdle and a point. The facets are slits that stop short of each other, so the stone shows its cut and still lifts as one piece.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.31 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 836 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 41 curve and line segments |
| Symmetry | Mirror |
| Also found as | Diamond icon SVG |
Measured from the file. PNG: 2,000 × 1,692 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 0.46 mm | 212 mm | 110 | Too fine for most machines |
| 2 × 1.68 in (51 × 43 mm) | 0.91 mm | 425 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.52 in (76 × 64 mm) | 1.4 mm | 637 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.36 in (102 × 85 mm) | 1.8 mm | 849 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.04 in (152 × 128 mm) | 2.7 mm | 1,274 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.72 in (203 × 171 mm) | 3.7 mm | 1,699 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.08 in (305 × 256 mm) | 5.5 mm | 2,548 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More diamond SVG files
-
Solid diamond silhouette Solid · one piece
-
Diamond outline Outline · one piece
-
Two-tone faceted diamond Solid · one piece
-
Sparkling diamond Solid · 4 pieces
-
Diamond ring Solid · one piece
-
Three diamonds Solid · 3 pieces
-
Round diamond from above Outline · one piece
-
Emerald-cut gemstone Outline · one piece
← Aztec stepped diamond All 21 diamonds Solid diamond silhouette →