Free clover SVG

Patch of clovers with one four-leaf SVG

Patch of clovers with one four-leaf, as a solid black shape
Patch of clovers with one four-leaf. The preview is the SVG file itself.

A patch as you find it in the grass: five leaves at different heights, two flowers, and one four-leaf clover among them to spot. All of it stands on a strip of ground.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 97 mm (3.94 × 3.82 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut23: 1 outer edge and 22 cut-outs
Cut length1,781 mm at this size
Narrowest part1.4 mm at this size
Nodes382 curve and line segments

Measured from the file. PNG: 2,000 × 1,942 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.36 mm452 mm100Too fine for most machines
2 × 1.94 in (51 × 49 mm)0.71 mm905 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.91 in (76 × 74 mm)1.1 mm1,357 mm9Vinyl, card and thin sheet
4 × 3.88 in (102 × 99 mm)1.4 mm1,809 mm4Vinyl, card and thin sheet
6 × 5.82 in (152 × 148 mm)2.1 mm2,714 mm2Vinyl, card and thin sheet
8 × 7.76 in (203 × 197 mm)2.8 mm3,619 mm1Vinyl, card and thin sheet
12 × 11.64 in (305 × 296 mm)4.3 mm5,428 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More clover SVG files

← Clover flower with two leaves All 13 clovers Posy of clover flowers →