Free clover SVG

Four-leaf clover monogram frame SVG

Four-leaf clover monogram frame, as a solid black shape
Four-leaf clover monogram frame. The preview is the SVG file itself.

Four leaflets set round a ring, with the middle of the ring cut clear and a stalk below. Put one initial in the round space, which is a little over 30 mm across when the clover is 100 mm tall.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size78 × 100 mm (3.07 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length761 mm at this size
Narrowest part3.3 mm at this size
Nodes95 curve and line segments

Measured from the file. PNG: 1,577 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.78 × 1 in (20 × 25 mm)0.84 mm193 mm120Fine detail: vinyl and paper only, weed with care
1.56 × 2 in (40 × 51 mm)1.7 mm387 mm30Vinyl, card and thin sheet
2.34 × 3 in (59 × 76 mm)2.5 mm580 mm12Vinyl, card and thin sheet
3.12 × 4 in (79 × 102 mm)3.4 mm773 mm6Any material, including 3 mm wood and acrylic
4.68 × 6 in (119 × 152 mm)5 mm1,160 mm2Any material, including 3 mm wood and acrylic
6.24 × 8 in (158 × 203 mm)6.7 mm1,546 mm1Any material, including 3 mm wood and acrylic
9.36 × 12 in (238 × 305 mm)10 mm2,320 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More clover SVG files

← Four-leaf clover in a horseshoe All 13 clovers Clover wreath →