Free clover SVG

Four-leaf clover with chevrons SVG

Four-leaf clover with chevrons, as a solid black shape
Four-leaf clover with chevrons. The preview is the SVG file itself.

The lucky one: four rounded leaflets set like an X, each with its chevron, on a thin curved stalk. The gaps between the leaflets are open, so it reads at a glance as four.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size72 × 100 mm (2.84 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length662 mm at this size
Narrowest part3.4 mm at this size
Nodes81 curve and line segments

Measured from the file. PNG: 1,465 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.86 mm168 mm130Fine detail: vinyl and paper only, weed with care
1.44 × 2 in (37 × 51 mm)1.7 mm336 mm35Vinyl, card and thin sheet
2.17 × 3 in (55 × 76 mm)2.6 mm504 mm15Vinyl, card and thin sheet
2.89 × 4 in (73 × 102 mm)3.5 mm673 mm6Any material, including 3 mm wood and acrylic
4.33 × 6 in (110 × 152 mm)5.2 mm1,009 mm2Any material, including 3 mm wood and acrylic
5.78 × 8 in (147 × 203 mm)6.9 mm1,345 mm2Any material, including 3 mm wood and acrylic
8.66 × 12 in (220 × 305 mm)10 mm2,018 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More clover SVG files

← Clover leaf with three leaflets All 13 clovers Clover flower with two leaves →