Free clover SVG

Four-leaf clover in a circle charm SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Four-leaf clover in a circle charm, as a solid black shape
Four-leaf clover in a circle charm. The preview is the SVG file itself.

A four-leaf clover held inside a ring, with a small loop at the top to hang it by. The four leaflets and the stalk all touch the ring, so it cuts as one sturdy piece for a key ring, a pendant or a gift tag.

What is in the file

Size89 × 100 mm (3.51 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,062 mm at this size
Narrowest part1.4 mm at this size
Nodes126 curve and line segments

Measured from the file. PNG: 1,792 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.36 mm270 mm110Too fine for most machines
1.78 × 2 in (45 × 51 mm)0.71 mm539 mm30Fine detail: vinyl and paper only, weed with care
2.68 × 3 in (68 × 76 mm)1.1 mm809 mm12Vinyl, card and thin sheet
3.57 × 4 in (91 × 102 mm)1.4 mm1,079 mm6Vinyl, card and thin sheet
5.35 × 6 in (136 × 152 mm)2.1 mm1,618 mm2Vinyl, card and thin sheet
7.14 × 8 in (181 × 203 mm)2.8 mm2,158 mm1Vinyl, card and thin sheet
10.7 × 12 in (272 × 305 mm)4.3 mm3,237 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More clover SVG files

← Posy of clover flowers All 13 clovers Four-leaf clover in a horseshoe →