Free clover SVG

Clover corner spray SVG

Clover corner spray, as a solid black shape
Clover corner spray. The preview is the SVG file itself.

A creeping stem runs along two edges from the corner, sending up leaves on thin stalks and one flower, as clover spreads through grass. For the corner of a card, a notebook page or a lucky note.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.92 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,150 mm at this size
Narrowest part1.3 mm at this size
Nodes275 curve and line segments

Measured from the file. PNG: 1,992 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.33 mm292 mm100Too fine for most machines
1.99 × 2 in (51 × 51 mm)0.66 mm584 mm25Fine detail: vinyl and paper only, weed with care
2.99 × 3 in (76 × 76 mm)0.99 mm876 mm9Fine detail: vinyl and paper only, weed with care
3.98 × 4 in (101 × 102 mm)1.3 mm1,168 mm4Vinyl, card and thin sheet
5.98 × 6 in (152 × 152 mm)2 mm1,753 mm1Vinyl, card and thin sheet
7.97 × 8 in (202 × 203 mm)2.6 mm2,337 mm1Vinyl, card and thin sheet
11.95 × 12 in (304 × 305 mm)4 mm3,505 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More clover SVG files

← Clover wreath All 13 clovers Clover outline with four leaflets →