Free clover SVG

Clover outline with four leaflets SVG

Clover outline with four leaflets, drawn as a line
Clover outline with four leaflets. The preview is the SVG file itself.

The four-leaf clover as a line drawing: each leaflet outlined, with its chevron drawn across from edge to edge, and a solid stalk. For colouring pages, foil, embroidery and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size70 × 100 mm (2.76 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length1,049 mm at this size
Narrowest part2.1 mm at this size
Nodes148 curve and line segments

Measured from the file. PNG: 1,425 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.53 mm266 mm130Fine detail: vinyl and paper only, weed with care
1.4 × 2 in (36 × 51 mm)1.1 mm533 mm35Vinyl, card and thin sheet
2.1 × 3 in (53 × 76 mm)1.6 mm799 mm15Vinyl, card and thin sheet
2.8 × 4 in (71 × 102 mm)2.1 mm1,066 mm8Vinyl, card and thin sheet
4.21 × 6 in (107 × 152 mm)3.2 mm1,599 mm2Any material, including 3 mm wood and acrylic
5.61 × 8 in (142 × 203 mm)4.3 mm2,132 mm2Any material, including 3 mm wood and acrylic
8.41 × 12 in (214 × 305 mm)6.4 mm3,197 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More clover SVG files

← Clover corner spray All 13 clovers Clover silhouette →