Free clover SVG

Four-leaf clover in a horseshoe SVG

Four-leaf clover in a horseshoe, as a solid black shape
Four-leaf clover in a horseshoe. The preview is the SVG file itself.

Two lucky charms in one: a four-leaf clover standing inside a horseshoe with seven nail holes, its open end upwards to keep the luck in. For good luck cards, exam wishes and new home gifts.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 92 mm (3.94 × 3.6 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,018 mm at this size
Narrowest part2.4 mm at this size
Nodes146 curve and line segments

Measured from the file. PNG: 2,000 × 1,837 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.61 mm259 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.83 in (51 × 46 mm)1.2 mm517 mm30Vinyl, card and thin sheet
3 × 2.74 in (76 × 70 mm)1.8 mm776 mm12Vinyl, card and thin sheet
4 × 3.66 in (102 × 93 mm)2.4 mm1,034 mm6Vinyl, card and thin sheet
6 × 5.49 in (152 × 139 mm)3.7 mm1,551 mm2Any material, including 3 mm wood and acrylic
8 × 7.32 in (203 × 186 mm)4.9 mm2,069 mm1Any material, including 3 mm wood and acrylic
12 × 10.98 in (305 × 279 mm)7.3 mm3,103 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More clover SVG files

← Four-leaf clover in a circle charm All 13 clovers Four-leaf clover monogram frame →