Free Cheers SVG

Cheers with a drop shadow SVG

Cheers with a drop shadow, in layered colours — Cheers with a drop shadow. The preview is the SVG file itself.

“Cheers” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 34 mm (3.94 × 1.34 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	11: 3 outer edges and 8 cut-outs
Cut length	939 mm at this size
Narrowest part	5.1 mm at this size
Nodes	301 curve and line segments
Layers	2: shadow and words

Measured from the file. PNG: 2,000 × 733 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.34 in (25 × 9 mm)	1.3 mm	239 mm	220	Vinyl, card and thin sheet
2 × 0.68 in (51 × 17 mm)	2.6 mm	477 mm	65	Vinyl, card and thin sheet
3 × 1.02 in (76 × 26 mm)	3.9 mm	716 mm	27	Any material, including 3 mm wood and acrylic
4 × 1.36 in (102 × 35 mm)	5.2 mm	954 mm	14	Any material, including 3 mm wood and acrylic
6 × 2.05 in (152 × 52 mm)	7.8 mm	1,431 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.73 in (203 × 69 mm)	10 mm	1,908 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.09 in (305 × 104 mm)	16 mm	2,862 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cheers SVG files

← Cheers stencil plate All 12 Cheers designs Cheers in Pacifico →