Cheers stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “CHEERS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 38 mm (3.94 × 1.51 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 809 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 166 curve and line segments |
Measured from the file. PNG: 2,000 × 815 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.38 in (25 × 10 mm) | 0.43 mm | 205 mm | 200 | Too fine for most machines |
| 2 × 0.77 in (51 × 20 mm) | 0.86 mm | 411 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.15 in (76 × 29 mm) | 1.3 mm | 616 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.54 in (102 × 39 mm) | 1.7 mm | 822 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.3 in (152 × 59 mm) | 2.6 mm | 1,233 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.07 in (203 × 78 mm) | 3.5 mm | 1,644 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.61 in (305 × 117 mm) | 5.2 mm | 2,466 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers SVG files
-
Cheers with a drop shadow Layered · 3 pieces
-
Cheers with a wine glass Solid · 3 pieces
-
Cheers in Pacifico Solid · 2 pieces
-
Cheers in Lobster Solid · 2 pieces
-
Cheers in Kaushan Script Solid · 6 pieces
-
Cheers in Lilita One Solid · 6 pieces
-
Cheers in Alfa Slab One Solid · 6 pieces
-
Cheers in Amatic SC Solid · 6 pieces
← Cheers outline lettering All 13 Cheers designs Cheers with a drop shadow →