Cheers in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cheers” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 26 mm (3.94 × 1 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 8: 6 outer edges and 2 cut-outs |
| Cut length | 485 mm at this size |
| Narrowest part | 3.9 mm at this size |
| Nodes | 136 curve and line segments |
Measured from the file. PNG: 2,000 × 567 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.26 in (25 × 6 mm) | 0.99 mm | 123 mm | 260 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.51 in (51 × 13 mm) | 2 mm | 246 mm | 85 | Vinyl, card and thin sheet |
| 3 × 0.76 in (76 × 19 mm) | 3 mm | 370 mm | 36 | Vinyl, card and thin sheet |
| 4 × 1.02 in (102 × 26 mm) | 4 mm | 493 mm | 20 | Any material, including 3 mm wood and acrylic |
| 6 × 1.53 in (152 × 39 mm) | 5.9 mm | 739 mm | 7 | Any material, including 3 mm wood and acrylic |
| 8 × 2.04 in (203 × 52 mm) | 7.9 mm | 986 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 3.06 in (305 × 78 mm) | 12 mm | 1,478 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers SVG files
-
Cheers in Alfa Slab One Solid · 6 pieces
-
Cheers in Amatic SC Solid · 6 pieces
-
Cheers in block capitals Solid · 6 pieces
-
Cheers with a swash underline Solid · 2 pieces
-
Cheers with stars Solid · 8 pieces
-
Cheers outline lettering Outline · 8 pieces
-
Cheers stencil plate Solid · one piece
-
Cheers with a drop shadow Layered · 3 pieces
← Cheers in Kaushan Script All 13 Cheers designs Cheers in Alfa Slab One →