Cheers in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cheers” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 46 mm (3.94 × 1.82 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 7: 6 outer edges and 1 cut-out |
| Cut length | 857 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 231 curve and line segments |
Measured from the file. PNG: 2,000 × 965 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.46 in (25 × 12 mm) | 0.46 mm | 218 mm | 180 | Too fine for most machines |
| 2 × 0.92 in (51 × 23 mm) | 0.91 mm | 435 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.39 in (76 × 35 mm) | 1.4 mm | 653 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.85 in (102 × 47 mm) | 1.8 mm | 871 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.77 in (152 × 70 mm) | 2.7 mm | 1,306 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.7 in (203 × 94 mm) | 3.7 mm | 1,741 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.54 in (305 × 141 mm) | 5.5 mm | 2,612 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers SVG files
-
Cheers in block capitals Solid · 6 pieces
-
Cheers with a swash underline Solid · 2 pieces
-
Cheers with stars Solid · 8 pieces
-
Cheers outline lettering Outline · 8 pieces
-
Cheers stencil plate Solid · one piece
-
Cheers with a drop shadow Layered · 3 pieces
-
Cheers with a wine glass Solid · 3 pieces
-
Cheers in Pacifico Solid · 2 pieces
← Cheers in Alfa Slab One All 13 Cheers designs Cheers in block capitals →