Cheers with a swash underline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cheers” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
What is in the file
| Size | 100 × 40 mm (3.94 × 1.57 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 5: 2 outer edges and 3 cut-outs |
| Cut length | 748 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 202 curve and line segments |
Measured from the file. PNG: 2,000 × 846 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.4 in (25 × 10 mm) | 0.36 mm | 190 mm | 200 | Too fine for most machines |
| 2 × 0.8 in (51 × 20 mm) | 0.71 mm | 380 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.2 in (76 × 30 mm) | 1.1 mm | 570 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.6 in (102 × 41 mm) | 1.4 mm | 760 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.4 in (152 × 61 mm) | 2.1 mm | 1,140 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.2 in (203 × 81 mm) | 2.8 mm | 1,520 mm | 3 | Vinyl, card and thin sheet |
| 12 × 4.8 in (305 × 122 mm) | 4.3 mm | 2,280 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers SVG files
-
Cheers with stars Solid · 8 pieces
-
Cheers outline lettering Outline · 8 pieces
-
Cheers stencil plate Solid · one piece
-
Cheers with a drop shadow Layered · 3 pieces
-
Cheers with a wine glass Solid · 3 pieces
-
Cheers in Pacifico Solid · 2 pieces
-
Cheers in Lobster Solid · 2 pieces
-
Cheers in Kaushan Script Solid · 6 pieces
← Cheers in block capitals All 13 Cheers designs Cheers with stars →