Free Cheers SVG

Cheers in Lobster SVG

Cheers in Lobster, as a solid black shape — Cheers in Lobster. The preview is the SVG file itself.

“Cheers” set in Lobster, a bold upright script. Upright and heavy, it stays readable from across a room and weeds easily.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 30 mm (3.94 × 1.18 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	5: 2 outer edges and 3 cut-outs
Cut length	584 mm at this size
Narrowest part	1.6 mm at this size
Nodes	207 curve and line segments

Measured from the file. PNG: 2,000 × 654 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.3 in (25 × 8 mm)	0.41 mm	148 mm	240	Too fine for most machines
2 × 0.6 in (51 × 15 mm)	0.81 mm	297 mm	75	Fine detail: vinyl and paper only, weed with care
3 × 0.9 in (76 × 23 mm)	1.2 mm	445 mm	33	Vinyl, card and thin sheet
4 × 1.2 in (102 × 30 mm)	1.6 mm	593 mm	16	Vinyl, card and thin sheet
6 × 1.8 in (152 × 46 mm)	2.4 mm	890 mm	6	Vinyl, card and thin sheet
8 × 2.4 in (203 × 61 mm)	3.3 mm	1,187 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.6 in (305 × 91 mm)	4.9 mm	1,780 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cheers SVG files

← Cheers in Pacifico All 12 Cheers designs Cheers in Kaushan Script →