Cheers in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cheers” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 32 mm (3.94 × 1.26 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 5: 2 outer edges and 3 cut-outs |
| Cut length | 564 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 160 curve and line segments |
Measured from the file. PNG: 2,000 × 694 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.32 in (25 × 8 mm) | 0.61 mm | 143 mm | 230 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.64 in (51 × 16 mm) | 1.2 mm | 287 mm | 70 | Vinyl, card and thin sheet |
| 3 × 0.96 in (76 × 24 mm) | 1.8 mm | 430 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.28 in (102 × 33 mm) | 2.4 mm | 573 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.93 in (152 × 49 mm) | 3.7 mm | 860 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.57 in (203 × 65 mm) | 4.9 mm | 1,146 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.85 in (305 × 98 mm) | 7.3 mm | 1,719 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers SVG files
-
Cheers in Lobster Solid · 2 pieces
-
Cheers in Kaushan Script Solid · 6 pieces
-
Cheers in Lilita One Solid · 6 pieces
-
Cheers in Alfa Slab One Solid · 6 pieces
-
Cheers in Amatic SC Solid · 6 pieces
-
Cheers in block capitals Solid · 6 pieces
-
Cheers with a swash underline Solid · 2 pieces
-
Cheers with stars Solid · 8 pieces
← Cheers with a wine glass All 13 Cheers designs Cheers in Lobster →