Free Cheers SVG

Cheers in block capitals SVG

Cheers in block capitals, as a solid black shape — Cheers in block capitals. The preview is the SVG file itself.

“CHEERS” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 32 mm (3.94 × 1.26 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	7: 6 outer edges and 1 cut-out
Cut length	774 mm at this size
Narrowest part	3.8 mm at this size
Nodes	107 curve and line segments

Measured from the file. PNG: 2,000 × 692 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.32 in (25 × 8 mm)	0.97 mm	197 mm	230	Fine detail: vinyl and paper only, weed with care
2 × 0.64 in (51 × 16 mm)	1.9 mm	393 mm	70	Vinyl, card and thin sheet
3 × 0.96 in (76 × 24 mm)	2.9 mm	590 mm	30	Vinyl, card and thin sheet
4 × 1.28 in (102 × 33 mm)	3.9 mm	786 mm	16	Any material, including 3 mm wood and acrylic
6 × 1.92 in (152 × 49 mm)	5.8 mm	1,180 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.56 in (203 × 65 mm)	7.7 mm	1,573 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.84 in (305 × 98 mm)	12 mm	2,359 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cheers SVG files

← Cheers in Amatic SC All 12 Cheers designs Cheers with a swash underline →