Layered bowling ball and pins in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Four layers to stack: a dark backing in the shape of the whole group, two cream pins leaning to the left, their red neck stripes and a blue ball. The backing shows as an outline round every part.
What is in the file
| Size | 93 × 100 mm (3.66 × 3.94 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 12: 8 outer edges and 4 cut-outs |
| Cut length | 1,080 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 148 curve and line segments |
| Layers | 4: backing, pins, stripes and ball |
Measured from the file. PNG: 1,865 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.93 × 1 in (24 × 25 mm) | Over 1.5 mm | 274 mm | 100 | Vinyl, card and thin sheet |
| 1.86 × 2 in (47 × 51 mm) | Over 3 mm | 549 mm | 25 | Any material, including 3 mm wood and acrylic |
| 2.79 × 3 in (71 × 76 mm) | Over 4.6 mm | 823 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.72 × 4 in (94 × 102 mm) | Over 6.1 mm | 1,097 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.58 × 6 in (142 × 152 mm) | Over 9.1 mm | 1,646 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.44 × 8 in (189 × 203 mm) | Over 12 mm | 2,195 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.16 × 12 in (283 × 305 mm) | Over 18 mm | 3,292 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More bowling SVG files
-
Bowling ball and three pins Solid · one piece -
Bowling pin with two stripes Solid · one piece -
Bowling ball with three holes Solid · one piece -
Bowling strike with flying pins Solid · one piece -
Bowling pins exploding from a burst Solid · one piece -
Bowling rack of ten pins Solid · one piece -
Crossed bowling pins with a ball Solid · one piece -
Bowling silhouette of a bowler Solid · one piece
← Bowling pin and ball outline All 15 bowling designs Bowling ball and three pins →