Bowling rack of ten pins SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A full rack seen from the front: one pin, then two, three and four, each row standing a little higher than the one before, all ten with their stripes. One piece, held together where the pins overlap.
What is in the file
| Size | 100 × 96 mm (3.94 × 3.78 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 16: 1 outer edge and 15 cut-outs |
| Cut length | 1,200 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 363 curve and line segments |
Measured from the file. PNG: 2,000 × 1,923 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.96 in (25 × 24 mm) | 0.28 mm | 305 mm | 100 | Too fine for most machines |
| 2 × 1.92 in (51 × 49 mm) | 0.56 mm | 610 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.88 in (76 × 73 mm) | 0.84 mm | 914 mm | 9 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.84 in (102 × 98 mm) | 1.1 mm | 1,219 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.76 in (152 × 146 mm) | 1.7 mm | 1,829 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.68 in (203 × 195 mm) | 2.2 mm | 2,438 mm | 1 | Vinyl, card and thin sheet |
| 12 × 11.52 in (305 × 293 mm) | 3.4 mm | 3,658 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More bowling SVG files
-
Crossed bowling pins with a ball Solid · one piece -
Bowling silhouette of a bowler Solid · one piece -
Bowling shoe Solid · one piece -
Bowling lane with pins at the end Solid · one piece -
Split bowling ball and pins for a name Solid · 4 pieces -
Bowling heart with crossed pins Solid · one piece -
Bowling ball monogram frame Solid · one piece -
Bowling pin and ball outline Outline · one piece
← Bowling pins exploding from a burst All 15 bowling designs Crossed bowling pins with a ball →