Bowling silhouette of a bowler SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A bowler at the moment of release, facing right: sliding on the front foot, the back leg swept out behind, one arm following the ball and the other held back for balance. One solid piece on a level strip of lane.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 71 mm (3.94 × 2.78 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 608 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 161 curve and line segments |
Measured from the file. PNG: 2,000 × 1,437 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.71 in (25 × 18 mm) | 0.97 mm | 154 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.41 in (51 × 36 mm) | 1.9 mm | 309 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.12 in (76 × 54 mm) | 2.9 mm | 463 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.83 in (102 × 72 mm) | 3.9 mm | 618 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.24 in (152 × 108 mm) | 5.8 mm | 927 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.66 in (203 × 144 mm) | 7.7 mm | 1,235 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.48 in (305 × 215 mm) | 12 mm | 1,853 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More bowling SVG files
-
Bowling shoe Solid · one piece -
Bowling lane with pins at the end Solid · one piece -
Split bowling ball and pins for a name Solid · 4 pieces -
Bowling heart with crossed pins Solid · one piece -
Bowling ball monogram frame Solid · one piece -
Bowling pin and ball outline Outline · one piece -
Layered bowling ball and pins in four colours Layered · 8 pieces -
Bowling ball and three pins Solid · one piece
← Crossed bowling pins with a ball All 15 bowling designs Bowling shoe →