Bowling pin and ball outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A leaning pin and a ball in front of it, drawn as an even line: the pin with its two stripes, the ball with three ring holes that link to each other and to the rim, so nothing falls out. For colouring pages, foil and pen plotters.
What is in the file
| Size | 67 × 100 mm (2.65 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 731 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 96 curve and line segments |
Measured from the file. PNG: 1,369 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.67 × 1 in (17 × 25 mm) | 0.53 mm | 186 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 1.34 × 2 in (34 × 51 mm) | 1.1 mm | 371 mm | 35 | Vinyl, card and thin sheet |
| 2.02 × 3 in (51 × 76 mm) | 1.6 mm | 557 mm | 15 | Vinyl, card and thin sheet |
| 2.69 × 4 in (68 × 102 mm) | 2.1 mm | 743 mm | 8 | Vinyl, card and thin sheet |
| 4.03 × 6 in (102 × 152 mm) | 3.2 mm | 1,114 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.38 × 8 in (137 × 203 mm) | 4.3 mm | 1,485 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.06 × 12 in (205 × 305 mm) | 6.4 mm | 2,228 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More bowling SVG files
-
Layered bowling ball and pins in four colours Layered · 8 pieces -
Bowling ball and three pins Solid · one piece -
Bowling pin with two stripes Solid · one piece -
Bowling ball with three holes Solid · one piece -
Bowling strike with flying pins Solid · one piece -
Bowling pins exploding from a burst Solid · one piece -
Bowling rack of ten pins Solid · one piece -
Crossed bowling pins with a ball Solid · one piece
← Bowling ball monogram frame All 15 bowling designs Layered bowling ball and pins in four colours →