Bowling ball and three pins SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A ball standing in front of three pins, the middle one upright and the outer two leaning away. A slim gap is cut round whatever stands in front and stops short of the edges, so the group lifts in one piece.
What is in the file
| Size | 82 × 100 mm (3.23 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 812 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 163 curve and line segments |
Measured from the file. PNG: 1,654 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.82 × 1 in (21 × 25 mm) | 0.53 mm | 206 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.64 × 2 in (42 × 51 mm) | 1.1 mm | 412 mm | 30 | Vinyl, card and thin sheet |
| 2.46 × 3 in (62 × 76 mm) | 1.6 mm | 619 mm | 12 | Vinyl, card and thin sheet |
| 3.28 × 4 in (83 × 102 mm) | 2.1 mm | 825 mm | 6 | Vinyl, card and thin sheet |
| 4.92 × 6 in (125 × 152 mm) | 3.2 mm | 1,237 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.56 × 8 in (167 × 203 mm) | 4.3 mm | 1,650 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.84 × 12 in (250 × 305 mm) | 6.4 mm | 2,475 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More bowling SVG files
-
Bowling pin with two stripes Solid · one piece -
Bowling ball with three holes Solid · one piece -
Bowling strike with flying pins Solid · one piece -
Bowling pins exploding from a burst Solid · one piece -
Bowling rack of ten pins Solid · one piece -
Crossed bowling pins with a ball Solid · one piece -
Bowling silhouette of a bowler Solid · one piece -
Bowling shoe Solid · one piece
← Layered bowling ball and pins in four colours All 15 bowling designs Bowling pin with two stripes →