Bowling pins exploding from a burst SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Five pins thrown up and out from a jagged burst on a short strip of lane: one straight up, two leaning and two nearly flat. Exactly mirrored, so it centres itself over a team name.
What is in the file
| Size | 100 × 74 mm (3.94 × 2.9 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 834 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 229 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,494 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.74 in (25 × 19 mm) | 0.43 mm | 212 mm | 130 | Too fine for most machines |
| 2 × 1.47 in (51 × 37 mm) | 0.86 mm | 424 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.21 in (76 × 56 mm) | 1.3 mm | 636 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.95 in (102 × 75 mm) | 1.7 mm | 847 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.42 in (152 × 112 mm) | 2.6 mm | 1,271 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.9 in (203 × 150 mm) | 3.5 mm | 1,695 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.84 in (305 × 225 mm) | 5.2 mm | 2,542 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More bowling SVG files
-
Bowling rack of ten pins Solid · one piece -
Crossed bowling pins with a ball Solid · one piece -
Bowling silhouette of a bowler Solid · one piece -
Bowling shoe Solid · one piece -
Bowling lane with pins at the end Solid · one piece -
Split bowling ball and pins for a name Solid · 4 pieces -
Bowling heart with crossed pins Solid · one piece -
Bowling ball monogram frame Solid · one piece
← Bowling strike with flying pins All 15 bowling designs Bowling rack of ten pins →