Bowling shoe SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rental shoe in profile: a low laced upper with a toe cap, a saddle panel across the middle and a stiff heel counter, on a flat sole with a small heel. Cut the panels again in two colours for the classic look.
What is in the file
| Size | 100 × 50 mm (3.94 × 1.97 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 718 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 102 curve and line segments |
Measured from the file. PNG: 2,000 × 1,038 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.5 in (25 × 13 mm) | 0.56 mm | 182 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1 in (51 × 25 mm) | 1.1 mm | 365 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.5 in (76 × 38 mm) | 1.7 mm | 547 mm | 21 | Vinyl, card and thin sheet |
| 4 × 2 in (102 × 51 mm) | 2.2 mm | 729 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3 in (152 × 76 mm) | 3.4 mm | 1,094 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4 in (203 × 102 mm) | 4.5 mm | 1,459 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6 in (305 × 152 mm) | 6.7 mm | 2,188 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More bowling SVG files
-
Bowling lane with pins at the end Solid · one piece -
Split bowling ball and pins for a name Solid · 4 pieces -
Bowling heart with crossed pins Solid · one piece -
Bowling ball monogram frame Solid · one piece -
Bowling pin and ball outline Outline · one piece -
Layered bowling ball and pins in four colours Layered · 8 pieces -
Bowling ball and three pins Solid · one piece -
Bowling pin with two stripes Solid · one piece
← Bowling silhouette of a bowler All 15 bowling designs Bowling lane with pins at the end →