Free bookmark SVG

Heart bookmark with a page clip SVG

Heart bookmark with a page clip, as a solid black shape — Heart bookmark with a page clip. The preview is the SVG file itself.

A heart on a short strip with a tongue cut into it. Slip the tongue behind the page and the strip in front, and the heart stands above the top of the book.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	44 × 100 mm (1.71 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	508 mm at this size
Narrowest part	2.2 mm at this size
Nodes	49 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 913 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.44 × 1 in (11 × 25 mm)	0.56 mm	129 mm	190	Fine detail: vinyl and paper only, weed with care
0.87 × 2 in (22 × 51 mm)	1.1 mm	258 mm	55	Vinyl, card and thin sheet
1.31 × 3 in (33 × 76 mm)	1.7 mm	387 mm	24	Vinyl, card and thin sheet
1.74 × 4 in (44 × 102 mm)	2.2 mm	516 mm	12	Vinyl, card and thin sheet
2.61 × 6 in (66 × 152 mm)	3.4 mm	774 mm	4	Any material, including 3 mm wood and acrylic
3.48 × 8 in (88 × 203 mm)	4.5 mm	1,032 mm	3	Any material, including 3 mm wood and acrylic
5.22 × 12 in (133 × 305 mm)	6.7 mm	1,548 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bookmark SVG files

← Feather bookmark All 14 bookmarks Floral bookmark with cut-out leaves →