Free bookmark SVG

Bookmark with a tassel SVG

Bookmark with a tassel, as a solid black shape
Bookmark with a tassel. The preview is the SVG file itself.

A classic bookmark as a picture: a rounded strip with a fine frame line, and a cord that runs from the hole to a tassel hanging beside it. One welded piece, for reading logs, stickers and book-club cards.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size45 × 100 mm (1.78 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length780 mm at this size
Narrowest part1.9 mm at this size
Nodes67 curve and line segments

Measured from the file. PNG: 944 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.45 × 1 in (11 × 25 mm)0.48 mm198 mm180Too fine for most machines
0.9 × 2 in (23 × 51 mm)0.97 mm396 mm55Fine detail: vinyl and paper only, weed with care
1.35 × 3 in (34 × 76 mm)1.4 mm594 mm21Vinyl, card and thin sheet
1.8 × 4 in (46 × 102 mm)1.9 mm792 mm12Vinyl, card and thin sheet
2.71 × 6 in (69 × 152 mm)2.9 mm1,189 mm4Vinyl, card and thin sheet
3.61 × 8 in (92 × 203 mm)3.9 mm1,585 mm3Any material, including 3 mm wood and acrylic
5.41 × 12 in (137 × 305 mm)5.8 mm2,377 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bookmark SVG files

← Layered bookmark with a scalloped edge All 14 bookmarks Bookmark template with a tassel hole →