Free bookmark SVG

Feather bookmark SVG

Feather bookmark, as a solid black shape — Feather bookmark. The preview is the SVG file itself.

A long feather to slip between the pages: a slit down the shaft, six splits in the vane and a quill at the foot. Good in thin wood, leather or acrylic, or as heavy card with the edges inked.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	29 × 100 mm (1.16 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	493 mm at this size
Narrowest part	1.8 mm at this size
Nodes	36 curve and line segments

Measured from the file. PNG: 642 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.29 × 1 in (7 × 25 mm)	0.46 mm	125 mm	240	Too fine for most machines
0.59 × 2 in (15 × 51 mm)	0.91 mm	250 mm	75	Fine detail: vinyl and paper only, weed with care
0.88 × 3 in (22 × 76 mm)	1.4 mm	376 mm	33	Vinyl, card and thin sheet
1.18 × 4 in (30 × 102 mm)	1.8 mm	501 mm	16	Vinyl, card and thin sheet
1.76 × 6 in (45 × 152 mm)	2.7 mm	751 mm	6	Vinyl, card and thin sheet
2.35 × 8 in (60 × 203 mm)	3.7 mm	1,002 mm	4	Any material, including 3 mm wood and acrylic
3.53 × 12 in (90 × 305 mm)	5.5 mm	1,503 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bookmark SVG files

← Monogram bookmark with a round top All 14 bookmarks Heart bookmark with a page clip →