Free bookmark SVG

Moon and stars bookmark SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Moon and stars bookmark, as a solid black shape
Moon and stars bookmark. The preview is the SVG file itself.

A strip with an arched top, a crescent moon cut from the arch and six stars and six dots falling down the length. For night-time readers, with a dark card behind or held up to the light.

What is in the file

Size28 × 100 mm (1.1 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length499 mm at this size
Narrowest part3.2 mm at this size
Nodes89 curve and line segments

Measured from the file. PNG: 615 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.28 × 1 in (7 × 25 mm)0.81 mm127 mm250Fine detail: vinyl and paper only, weed with care
0.56 × 2 in (14 × 51 mm)1.6 mm253 mm80Vinyl, card and thin sheet
0.84 × 3 in (21 × 76 mm)2.4 mm380 mm33Vinyl, card and thin sheet
1.12 × 4 in (28 × 102 mm)3.3 mm507 mm18Any material, including 3 mm wood and acrylic
1.68 × 6 in (43 × 152 mm)4.9 mm760 mm6Any material, including 3 mm wood and acrylic
2.24 × 8 in (57 × 203 mm)6.5 mm1,014 mm5Any material, including 3 mm wood and acrylic
3.36 × 12 in (85 × 305 mm)9.8 mm1,521 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bookmark SVG files

← Floral bookmark with cut-out leaves All 14 bookmarks Cat bookmark →