Free bookmark SVG

Arrow bookmark SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Arrow bookmark, as a solid black shape
Arrow bookmark. The preview is the SVG file itself.

A strip shaped as an arrow: a broad head at the top with a hole for a tassel, a straight shaft with a slit down the middle and feathered flights at the foot.

What is in the file

Size33 × 100 mm (1.29 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length452 mm at this size
Narrowest part3 mm at this size
Nodes60 curve and line segments
SymmetryMirror

Measured from the file. PNG: 706 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.33 × 1 in (8 × 25 mm)0.76 mm115 mm230Fine detail: vinyl and paper only, weed with care
0.65 × 2 in (17 × 51 mm)1.5 mm230 mm70Vinyl, card and thin sheet
0.98 × 3 in (25 × 76 mm)2.3 mm344 mm30Vinyl, card and thin sheet
1.31 × 4 in (33 × 102 mm)3 mm459 mm16Any material, including 3 mm wood and acrylic
1.96 × 6 in (50 × 152 mm)4.6 mm689 mm5Any material, including 3 mm wood and acrylic
2.62 × 8 in (66 × 203 mm)6.1 mm918 mm4Any material, including 3 mm wood and acrylic
3.92 × 12 in (100 × 305 mm)9.1 mm1,378 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bookmark SVG files

← Cat bookmark All 14 bookmarks Layered bookmark with a scalloped edge →