Free bookmark SVG

Corner bookmark template to fold SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Corner bookmark template to fold, as a solid black shape
Corner bookmark template to fold. The preview is the SVG file itself.

A square with a triangular flap on two sides and dashed fold lines. Fold both flaps over the square, glue one on top of the other and it becomes a pocket that slips over the corner of a page.

What is in the file

Size67 × 100 mm (2.63 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length493 mm at this size
Narrowest part1.8 mm at this size
Nodes72 curve and line segments

Measured from the file. PNG: 1,360 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.67 × 1 in (17 × 25 mm)0.46 mm125 mm140Too fine for most machines
1.33 × 2 in (34 × 51 mm)0.91 mm250 mm35Fine detail: vinyl and paper only, weed with care
2 × 3 in (51 × 76 mm)1.4 mm376 mm15Vinyl, card and thin sheet
2.67 × 4 in (68 × 102 mm)1.8 mm501 mm8Vinyl, card and thin sheet
4 × 6 in (102 × 152 mm)2.7 mm751 mm2Vinyl, card and thin sheet
5.34 × 8 in (136 × 203 mm)3.7 mm1,002 mm2Any material, including 3 mm wood and acrylic
8 × 12 in (203 × 305 mm)5.5 mm1,503 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bookmark SVG files

← Bookmark shapes, set of three All 14 bookmarks Heart corner bookmark →