Free bookmark SVG

Floral bookmark with cut-out leaves SVG

Floral bookmark with cut-out leaves, as a solid black shape — Floral bookmark with cut-out leaves. The preview is the SVG file itself.

A strip pierced with a climbing stem of twelve leaves and a six-petal flower at the top. The cut-outs keep 2.5 mm clear of the edge, so the strip stays strong enough to use.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	28 × 100 mm (1.1 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	596 mm at this size
Narrowest part	2.3 mm at this size
Nodes	123 curve and line segments

Measured from the file. PNG: 615 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.28 × 1 in (7 × 25 mm)	0.58 mm	151 mm	250	Fine detail: vinyl and paper only, weed with care
0.56 × 2 in (14 × 51 mm)	1.2 mm	303 mm	80	Vinyl, card and thin sheet
0.84 × 3 in (21 × 76 mm)	1.8 mm	454 mm	33	Vinyl, card and thin sheet
1.12 × 4 in (28 × 102 mm)	2.3 mm	606 mm	18	Vinyl, card and thin sheet
1.68 × 6 in (43 × 152 mm)	3.5 mm	908 mm	6	Any material, including 3 mm wood and acrylic
2.24 × 8 in (57 × 203 mm)	4.7 mm	1,211 mm	5	Any material, including 3 mm wood and acrylic
3.36 × 12 in (85 × 305 mm)	7 mm	1,817 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bookmark SVG files

← Heart bookmark with a page clip All 14 bookmarks Moon and stars bookmark →