Free Boo SVG

Boo stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boo stencil plate, as a solid black shape
Boo stencil plate. The preview is the SVG file itself.

A rounded plate with “BOO” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 62 mm (3.94 × 2.44 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length942 mm at this size
Narrowest part1.7 mm at this size
Nodes103 curve and line segments

Measured from the file. PNG: 2,000 × 1,271 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.43 mm239 mm140Too fine for most machines
2 × 1.24 in (51 × 32 mm)0.86 mm479 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.86 in (76 × 47 mm)1.3 mm718 mm15Vinyl, card and thin sheet
4 × 2.48 in (102 × 63 mm)1.7 mm957 mm8Vinyl, card and thin sheet
6 × 3.73 in (152 × 95 mm)2.6 mm1,436 mm3Vinyl, card and thin sheet
8 × 4.97 in (203 × 126 mm)3.5 mm1,914 mm2Any material, including 3 mm wood and acrylic
12 × 7.45 in (305 × 189 mm)5.2 mm2,871 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boo SVG files

← Boo outline lettering All 14 Boo designs Boo with a drop shadow →