Boo with a drop shadow SVG
“Boo” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 52 mm (3.94 × 2.04 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 8: 4 outer edges and 4 cut-outs |
| Cut length | 1,059 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 216 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,075 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.52 in (25 × 13 mm) | Over 1.5 mm | 269 mm | 160 | Vinyl, card and thin sheet |
| 2 × 1.04 in (51 × 26 mm) | Over 3 mm | 538 mm | 45 | Any material, including 3 mm wood and acrylic |
| 3 × 1.56 in (76 × 40 mm) | Over 4.6 mm | 807 mm | 18 | Any material, including 3 mm wood and acrylic |
| 4 × 2.08 in (102 × 53 mm) | Over 6.1 mm | 1,076 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 3.11 in (152 × 79 mm) | Over 9.1 mm | 1,614 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.15 in (203 × 105 mm) | Over 12 mm | 2,152 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.23 in (305 × 158 mm) | Over 18 mm | 3,228 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.