Free Boo SVG

Boo in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boo in Amatic SC, as a solid black shape
Boo in Amatic SC. The preview is the SVG file itself.

“Boo” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 88 mm (3.94 × 3.46 in), scales to any size
Pieces3 separate pieces
Outlines to cut7: 3 outer edges and 4 cut-outs
Cut length1,066 mm at this size
Narrowest part5 mm at this size
Nodes185 curve and line segments

Measured from the file. PNG: 2,000 × 1,769 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)1.3 mm271 mm110Vinyl, card and thin sheet
2 × 1.76 in (51 × 45 mm)2.5 mm542 mm30Vinyl, card and thin sheet
3 × 2.64 in (76 × 67 mm)3.8 mm812 mm12Any material, including 3 mm wood and acrylic
4 × 3.52 in (102 × 89 mm)5.1 mm1,083 mm6Any material, including 3 mm wood and acrylic
6 × 5.28 in (152 × 134 mm)7.6 mm1,625 mm2Any material, including 3 mm wood and acrylic
8 × 7.04 in (203 × 179 mm)10 mm2,166 mm1Any material, including 3 mm wood and acrylic
12 × 10.56 in (305 × 268 mm)15 mm3,249 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boo SVG files

← Boo in Alfa Slab One All 14 Boo designs Boo in block capitals →