Free Boo SVG

Boo in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boo in Alfa Slab One, as a solid black shape
Boo in Alfa Slab One. The preview is the SVG file itself.

“Boo” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 40 mm (3.94 × 1.56 in), scales to any size
Pieces3 separate pieces
Outlines to cut7: 3 outer edges and 4 cut-outs
Cut length459 mm at this size
Narrowest part5.7 mm at this size
Nodes63 curve and line segments

Measured from the file. PNG: 2,000 × 837 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.4 in (25 × 10 mm)1.4 mm117 mm200Vinyl, card and thin sheet
2 × 0.79 in (51 × 20 mm)2.9 mm233 mm60Vinyl, card and thin sheet
3 × 1.18 in (76 × 30 mm)4.3 mm350 mm24Any material, including 3 mm wood and acrylic
4 × 1.58 in (102 × 40 mm)5.8 mm466 mm12Any material, including 3 mm wood and acrylic
6 × 2.37 in (152 × 60 mm)8.7 mm700 mm4Any material, including 3 mm wood and acrylic
8 × 3.16 in (203 × 80 mm)12 mm933 mm3Any material, including 3 mm wood and acrylic
12 × 4.74 in (305 × 120 mm)17 mm1,399 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boo SVG files

← Boo in Lilita One All 14 Boo designs Boo in Amatic SC →