Free Boo SVG

Boo with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boo with stars, as a solid black shape
Boo with stars. The preview is the SVG file itself.

“Boo” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 79 mm (3.94 × 3.12 in), scales to any size
Pieces8 separate pieces
Outlines to cut10: 8 outer edges and 2 cut-outs
Cut length855 mm at this size
Narrowest part2.5 mm at this size
Nodes152 curve and line segments

Measured from the file. PNG: 2,000 × 1,602 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.64 mm217 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.59 in (51 × 40 mm)1.3 mm434 mm30Vinyl, card and thin sheet
3 × 2.38 in (76 × 60 mm)1.9 mm652 mm12Vinyl, card and thin sheet
4 × 3.17 in (102 × 81 mm)2.5 mm869 mm6Vinyl, card and thin sheet
6 × 4.76 in (152 × 121 mm)3.8 mm1,303 mm2Any material, including 3 mm wood and acrylic
8 × 6.34 in (203 × 161 mm)5.1 mm1,737 mm1Any material, including 3 mm wood and acrylic
12 × 9.52 in (305 × 242 mm)7.6 mm2,606 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boo SVG files

← Boo in Creepster All 14 Boo designs Boo outline lettering →