Free Boo SVG

Boo in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boo in Lilita One, as a solid black shape
Boo in Lilita One. The preview is the SVG file itself.

“Boo” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 46 mm (3.94 × 1.82 in), scales to any size
Pieces3 separate pieces
Outlines to cut7: 3 outer edges and 4 cut-outs
Cut length472 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes62 curve and line segments

Measured from the file. PNG: 2,000 × 967 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)Over 1.5 mm120 mm180Vinyl, card and thin sheet
2 × 0.93 in (51 × 24 mm)Over 3 mm240 mm50Any material, including 3 mm wood and acrylic
3 × 1.39 in (76 × 35 mm)Over 4.6 mm360 mm21Any material, including 3 mm wood and acrylic
4 × 1.85 in (102 × 47 mm)Over 6.1 mm480 mm10Any material, including 3 mm wood and acrylic
6 × 2.78 in (152 × 71 mm)Over 9.1 mm719 mm4Any material, including 3 mm wood and acrylic
8 × 3.7 in (203 × 94 mm)Over 12 mm959 mm3Any material, including 3 mm wood and acrylic
12 × 5.56 in (305 × 141 mm)Over 18 mm1,439 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boo SVG files

← Boo in Kaushan Script All 14 Boo designs Boo in Alfa Slab One →